7 Series E38 740iL (M62) SAL
Check fuel pump:
Fold right side trim in luggage compartment to one side. The relay
bracket is installed above the battery.
Detach fuel pump relay (2).
Check whether fuel pump no longer starts up during engine
starting procedure (engine fails to start).
Connect special tool 61 3 050 to terminal (87) and terminal (30).
Actuate button and read off delivery pressure on DIS Tester.
Delivery pressure,
refer to Technical Data 16 14.
Keep special tool 13 3 010 available for further tests.
Further procedure for checks,
refer to 13 31 ... Fuel pressure check.
Installation:
Interrogate fault memory of DME control unit. Check stored
fault messages. Rectify faults. Now clear the fault memory.
RA Checking delivery pressure of fuel pump (M62)
BMW AG - TIS
17.02.2013 16:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -