7 Series E38 740iL (M62) SAL
13 63 555
Replacing throttle valve potentiometer (M60,
M62)
Switch off ignition.
Version 1:
(acoustic cover screwed down)
Remove seal caps (1) and unfasten nuts (2).
Remove acoustic cover.
Version 2:
(acoustic cover with press-stud fastener)
Open press-studs (1 ... 4) one at a time, at the same time lifting
the acoustic cover slightly. Once all four press-studs have been
opened, remove the acoustic cover.
Installation:
Position acoustic cover and press downwards until press-
studs (1 ... 4) click into place.
Disconnect connector (2).
RA Replacing throttle valve potentiometer (M60, M62)
BMW AG - TIS
17.02.2013 16:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -