7 Series E38 740iL (M62) SAL
Open cap on coolant expansion tank.
Remove vent plug completely.
Unclip retaining cap.
Pull expansion tank towards rear and detach vent hose.
Lift coolant expansion tank out of lower retaining lugs.
Installation:
The retaining lugs on the expansion tank must locate in the fan
cowl.
Top up with recommended coolant only.
Vent cooling system and check for leaks.
RA Removing and installing/replacing coolant expansion tank
BMW AG - TIS
17.02.2013 17:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
