7 Series E38 740iL (M62) SAL
24 12 102
Replacing radial seal for manual shift valve
shaft (A5S 440Z)
Note:
After completing work, check transmission oil level and top
up if necessary,
refer to 00 11 500 (A5S 440Z)
Remove rear underbody protection from assemblies.
Remove left and right sides of heat shield.
Brace clamping bush (1) and loosen nut (2).
Installation:
Adjust shift lever,
refer to 24 00 007.
Pry out retaining plate (1) with a screwdriver and pull out cable (2).
RA Replacing radial seal for manual shift valve shaft (A5S 440Z)
BMW AG - TIS
17.02.2013 19:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -