7 Series E38 740iL (M62) SAL
24 12 106
Replacing radial seal on manual shift valve
shaft (A5S 560Z)
Note:
After completing these operations, check the transmission
oil level and top up if necessary,
refer to 00 11 500 (A5S 560Z).
Move selector lever to "P" setting.
Remove rear splash guard.
For cable clamping up to 8.95:
Fit special tool 24 5 240 to the shift lever.
Note:
Only possible to fit in "P" setting.
Loosen nut (1).
Installation:
Adjust shift lever,
refer to 24 00 007.
Cable clamping from 8.95:
Brace clamping bush (1) and loosen nut (2).
Installation:
Adjust shift lever,
refer to 24 00 007.
RA Replacing radial seal on manual shift valve shaft (A5S 560Z)
BMW AG - TIS
17.02.2013 19:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
