7 Series E38 740iL (M62) SAL
Remove holder (1) from housing.
Tightening torque,
refer to Technical Data 24 34 3AZ.
Take off holder.
Installation:
Connecting rod (2) must engage in groove of locking lever (3).
Unscrew plug (4).
Installation:
Check seal (5), replace if necessary.
Tightening torque,
refer to Technical Data 24 11 4AZ.
Pull out bearing pin (1).
RA Removing and installing/replacing parking lock (A5S 440Z)
BMW AG - TIS
17.02.2013 19:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
