7 Series E38 740iL (M62) SAL
31 35 000
Removing and installing or replacing front
stabilizer
Remove front axle support,
refer to 31 11 001
Remove left and right push rod.
Installation:
Replace self-locking nut.
Tightening torque,
refer to Technical Data 31 35 5AZ
Unscrew left and right nuts.
Remove stabilizer.
Installation:
Wet retaining bracket with low-surface-tension water.
RA Removing and installing or replacing front stabilizer
BMW AG - TIS
17.02.2013 20:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -