7 Series E38 740iL (M62) SAL
Tighten down collar nut (1) only until marker points are aligned.
Caution!
Do not under any circumstances tighten down collar nut
beyond the marker points, otherwise clamping sleeve will
have to be replaced.
Drive in new retaining plate with special tools 00 5 500 and
33 3 480 or 33 3 490 .
RA Replacing shaft seal for input flange on final drive
BMW AG - TIS
18.02.2013 00:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -