7 Series E38 740iL (M62) SAL
34 51 520
Removing and installing / replacing ABS
hydraulic control unit
Note:
Note "General Information", refer to 34 00...
Caution!
After finishing work:
Check function of hydraulic control unit -
refer to BMW Diagnosis System.
Installation:
Bleeding brake system, refer to 34 00 047
Switch off ignition.
Disconnect battery negative lead, refer to Gr. 61
Draw brake fluid out of expansion tank with a suction bottle
reserved for exclusive use with brake fluid.
RA Removing and installing / replacing ABS hydraulic control unit
BMW AG - TIS
18.02.2013 00:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -