7 Series E38 740iL (M62) SAL
37 12 100
Removing and installing complete left or right
rear spring strut shock absorber
Caution!
Check oil level after installation,
refer to 32 13 006 .
Lift rear axle. After 2 mins. this causes accumulator to discharge
and line on shock absorber can be unfastened.
Seal opened connections with protective caps.
Installation:
Tightening torque, 37 12 1AZ.
Subsequent procedure is identical to Removing spring strut shock
absorber,
refer to 33 52 100 .
Installation:
Fit pipe so that it is free of tension.
Make sure it is cleanly routed with rubber grommet on spring
strut line holder.
RA Removing and installing complete left or right rear spring strut shock absorber
BMW AG - TIS
18.02.2013 01:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -