7 Series E38 740iL (M62) SAL
51 12 742
Replacing one impact absorber for rear
bumper
(bumper removed)
Remove floor mat.
Unfasten nut and lift out rear floor covering (1).
Lift finisher off tail panel trim and unfasten nut.
Installation:
Encoding (1) must be at top to ensure that straight surface is
at bottom.
Fold side trunk trim forwards.
Unfasten nut and pull impact absorber backwards to remove.
Installation:
Replace gasket on impact absorber.
RA Replacing one impact absorber for rear bumper
BMW AG - TIS
18.02.2013 02:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
