bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing _ Replacing Outside Handle On Left Or Right Back Door|Page 2148 > < 1 RA Adjusting Rear Left Or Right Door Detent (lock Wedges)
Page 1
background image

51 22 170

Removing and installing / replacing outside
handle on left or right back door

Lift out seal plugs (1) and (2).

Mask the area around the bore with fabric adhesive tape (risk of
damage).

Installation:

Fit new seal plugs.

Cut off foam tape around area (1) with Stanley knife (razor-sharp).

Insert screwdriver (A) and lift retaining tab (1) on locking plate (2)
over the retaining lug (3).

Using small screwdriver (B) (0.4 x 2 mm), press locking plate (2)
with raised retaining tab (1) forwards.

Remove both screwdrivers.

RA  Removing and installing / replacing outside handle on left or right back door

BMW AG - TIS

18.02.2013  08:30

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing _ Replacing Outside Handle On Left Or Right Back Door|Page 2148 > < 1 RA Adjusting Rear Left Or Right Door Detent (lock Wedges)