7 Series E38 740iL (M62) SAL
Cut through glue bead all around as close as possible to the rear
window glass.
1.
Body aperture
2.
Glue bead
3.
Knife
4.
Rear window
Suspend special tool 51 9 002 (suction lifter) from conventional
workshop lifting equipment.
Switch on vacuum pump.
Firmly attach special tool 51 9 002 to outside of rear window in
center in upper third.
Caution!
Follow operating instructions for special tool 51 9 002.
The pointer of the vacuum gauge must be in the green area.
Do not shorten connecting hose between suction hoist and
vacuum pump (minimum length 5 m).
Replacement with original hose only.
Raise rear window with special tool 51 9 002 (suction hoist)
slightly and, if necessary, carefully remove residual traces of
bonding.
Lift out rear window and place on assembly stand.
Switch off vacuum pump.
RA Removing and installing rear window (Protection)
BMW AG - TIS
18.02.2013 08:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
