7 Series E38 740iL (M62) SAL
When installing windshield (4), check that it is lower with respect to roof outer skin panel (1). This is the only way of
ensuring sufficient pretension between the sealing lip (2) and the roof (prevention of wind noise). Check installation
position of windshield (4) in middle of vehicle with special tool 51 3 210; a clearance (A) is permitted.
Dimensions:
Standard windows = designation "N":
(A) = 0 - 1.5 mm
Anti-theft windows = designation "S":
(A) = 0 - 0.6 mm
Pretension is generated with special tool 51 3 130 (three HR
foam blocks).
1 piece (1): 40 x 70 x 70 mm (W x H x D)
2 pieces (2): 40 x 30 x 70 mm (W x H x D)
Position of HR foam blocks:
HR foam block (1), middle, at distance (A) from top.
HR foam blocks (2), distance (A) from top, distance (B) at side.
(A) 100 mm
(B) 100 mm
RA Removing and installing front windscreen
BMW AG - TIS
18.02.2013 08:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -