7 Series E38 740iL (M62) SAL
Caution!
To avoid breaking windshield:
Before sticking on new spacer buffers,
remove remains of old spacer buffers completely.
Stick on semicircular spacer buffers (1) "outside" in moulding
(2) on left/right.
(3)
Expanding foam tape
Note:
Expanding foam tape (3) over gap between sound insulation
and cowl panel must be fitted from left to right, fit if necessary.
In direction of travel, left:
Stick on semicircular spacer buffers (1) "center/outside" between
bores (2).
Note:
Attach semicircular spacer buffer (1) to end of metal
radius (3).
(4)
Expanding foam tape
In direction of travel, right:
Stick on semicircular spacer buffers (1) "center/outside" between
bores (2).
Note:
Attach semicircular spacer buffer (1) to end of metal
radius (3).
(4)
Expanding foam tape
Attach semicircular spacer buffer (1) "centrally" at distance (A) on
right side (left side in direction of travel) at same height as bore
(2).
(A) 25 mm
(3)
Expanding foam tape
RA Removing and installing windshield (Protection)
BMW AG - TIS
18.02.2013 08:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -