bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Headliner (with Slide_tilt Sunroof)|Page 2338 > < 2 RA Removing And Installing_replacing Headliner (with Slide_tilt Sunroof)
Page 2
background image

Lift out interior light and remove connector.

Lift out finisher and disconnect connector.

Adjust left back-rest as far back as it will go.

Version up to 5/97:

Lever out expansion rivet (1) on left/right.

Pull headlining upwards out of sheet metal tabs and pull towards
right rear door to remove.

Version from 5/97:

Pull headlining upwards out of sheet metal tabs and pull towards
right rear door to remove.

Installation:

Insert special tool 51 4 000 in the support for headlining and
secure with fabric adhesive tape (2).

Version with telephone connection unit:

If necessary, slide over telephone connection unit (1).

RA  Removing and installing/replacing headliner (with slide/tilt sunroof)

BMW AG - TIS

18.02.2013  09:06

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing_replacing Headliner (with Slide_tilt Sunroof)|Page 2338 > < 2 RA Removing And Installing_replacing Headliner (with Slide_tilt Sunroof)