7 Series E38 740iL (M62) SAL
Unfasten nuts (1).
Tightening torque, refer to Technical Data 52 25 1AZ
Disconnect connector (2) (seat heating) and (3) (actuator drive).
Unlock connector (3) and remove from holder.
Lift rear seat backrest upwards to remove.
Installation:
Attach locating pin to seat in brackets on body.
Carry out operational check.
RA Removing and installing / replacing backrest for rear seat (normal/ electric)
BMW AG - TIS
18.02.2013 09:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -