bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing Stop On Headliner For Glass Sliding_tilting Sunroof Lid On Left Or Rig > < 2 RA Removing And Installing _ Replacing Bearing For Wind Deflector, Left Or Right
Page 1
background image

54 12 ...

Removing and installing / replacing float
switch for left or right gutter on glass slide/tilt
sunroof

Open glass sunroof.

Press wind deflector (1) down.

Release screw (2) on left or right and remove bearing (3).

Installation:

Tightening torque, refer to Technical Data 54 12 7AZ

Turn lever upwards and remove to the outside.

Release screw (1) and remove float (2).

Installation:

Check sealing surfaces and remove any contaminants (use
vacuum cleaner only, do not blow through with compressed
air).

Fit screw (1) with spacer bushing (3). 

Check float for ease of movement.

RA  Removing and installing / replacing float switch for left or right gutter on gla

BMW AG - TIS

18.02.2013  09:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing Stop On Headliner For Glass Sliding_tilting Sunroof Lid On Left Or Rig > < 2 RA Removing And Installing _ Replacing Bearing For Wind Deflector, Left Or Right