7 Series E38 740iL (M62) SAL
64 11 207
Replacing heater core (air conditioner
control)
Pry off clips from manifold cover. Unfasten screws and remove
cover with acoustic insulation.
Unfasten water hoses (1) on end wall. Carefully blow out lines to
clear remaining coolant from heater.
Installation:
Filling and bleeding the cooling system,
refer to 17 00 039
Remove center console,
refer to 51 16 200
Remove lower section of steering column trim panel and footwell
trim, then remove left footwell air duct.
Unfasten screws and place bracket to one side
RA Replacing heater core (air conditioner control)
BMW AG - TIS
18.02.2013 11:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
