7 Series E38 740iL (M62) SAL
67 63 510
Removing and installing or replacing
windshield wiper motor
Remove complete wiper console,
refer to 61 61 270
Unfasten nut (1) and lift lever (2) off shaft.
Unfasten screws (3) and remove wiper motor.
Installation:
Only secure engine with screws (3).
Install wiper console.
Actuate wiper until engine has run in rest position. Fit lever (1) to
shaft with linkages (4 and 5) in one line.
RA Removing and installing or replacing windshield wiper motor
BMW AG - TIS
18.02.2013 13:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -