7 Series E38 750i (M73) SAL
11 12 595
Checking one valve guide for wear (M73)
(valve removed)
To measure tilt clearance, insert new valve so that valve stem end
is flush with valve guide.
Mount dial gauge and measure tilt clearance.
Note:
Maximum permitted tilt clearance,
refer to Technical Data
Note:
If tilt clearance is excessive, valve guide is reamed out and a
repair valve with a larger shaft diameter is installed.
If necessary, ream out valve guide,
refer to 11 12 600
RA Checking one valve guide for wear (M73)
BMW AG - TIS
19.02.2013 13:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -