7 Series E38 750i (M73) SAL
12 12 072
Replace one spark plug connector (M40, M42,
M43, M44, M73).
Move rodent protection on ignition leads to one side.
Cut off ignition lead directly behind connector.
Strip insulation from ignition lead with insulation stripping pliers off
a 6 mm length (A), wire cross section of 1.5 mm
2
.
Fit special tool 12 1 083 to special tool 12 1 081.
Insert connector (1) in corresponding section of matrix.
RA Replace one spark plug connector (M40, M42, M43, M44, M73).
BMW AG - TIS
19.02.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
