7 Series E38 750i (M73) SAL
Ground wires on cap of spring strut shock absorber: unfasten
nuts.
Unfasten screws in cover on electronics box.
Tightening torque,
refer to Technical Data 12 14 4AZ
Remove relays (1 to 3) with bracket.
1.
Relays for Digital Motor Electronics (DME 1)
2.
Relays for Digital Motor Electronics (DME 2)
(can be recognized because cross section of feed lines is
greater than 2.5 mm
2
)
3.
Relay for starter motor inhibit
Disconnect plug connection on temperature sensor for electronics
box.
RA Wiring harness - replacing engine section (M73)
BMW AG - TIS
19.02.2013 15:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
