7 Series E38 750i (M73) SAL
Support transmission with special tool 00 2 030 / 24 0 170.
Unclip cable for oxygen sensors on transmission cross-member.
Unfasten screws and remove cross-member.
Installation:
Tightening Torque,
refer to Technical Data 24 71 1AZ.
Disconnect propeller shaft from transmission flange and tie up to
one side,
refer to 26 11 000.
Unfasten screws.
Installation:
Tightening Torque,
refer to Technical Data 24 11 1AZ
RA Replacing radial seal for output flange (A5S 560Z)
BMW AG - TIS
19.02.2013 16:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -