7 Series E38 750i (M73) SAL
33 32 131
Removing and installing one steering
knuckle/wheel carrier
Caution!
After assembly, perform rear wheel alignment
check/adjustment.
Remove wheel,
refer to 36 10 300
Unfasten collar nut (1).
Installation:
Replace collar nut. Tightening torque,
refer to Technical Data 33 41 3AZ .
Lock collar nut.
Press out output shaft with special tools
33 2 111 / 116 / 117.
RA Removing and installing one steering knuckle/wheel carrier
BMW AG - TIS
19.02.2013 18:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -