7 Series E38 750i (M73) SAL
37 14 017
Removing and installing/replacing the front
fitted acceleration sensor (EDC)
Remove the front right wheel,
refer to 36 10 300.
Remove wheel arch trim.
Partially loosen the bracket for the wiring harness and pull
the connector off of the fitted acceleration sensor (middle of
wheel arch, above).
Loosen the bolts and remove the fitted acceleration sensor.
RA Removing and installing/replacing the front fitted acceleration sensor (EDC)
BMW AG - TIS
19.02.2013 19:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
