7 Series E38 750i (M73) SAL
Produce reinforcement plates for the water drain.
Width = min. 60 mm.
At least 30 mm overlap on each side.
Cut out side panel replacement section roughly from a new part, fit
in and cut out to final size.
Clean and coat mating surfaces on replacement section with zinc
dust paint.
Coat reinforcement plates and joints on body with zinc dust paint,
fit in and weld.
RA Replacing left rear side panel (partial replacement)
BMW AG - TIS
19.02.2013 20:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
