7 Series E38 750i (M73) SAL
Release cable tie (1) on wiring harness (2).
Disconnect plug connections (4).
Release expansion rivets (1).
Using special tool 00 9 317 (trim panel wedge), lever out
sealing bead (1) of sound insulation (2) completely or if necessary
partially.
Installation:
In event of replacement or partial detachment, lay butylene
tape (sourcing reference: BMW Parts Service) on inner door
plate or sound insulation.
Seal cable penetrations with butylene tape.
RA Removing and installing/replacing sound insulation in front door, left or right
BMW AG - TIS
19.02.2013 21:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -