7 Series E38 750i (M73) SAL
54 12 136
Removing and installing/replacing roof-lining
frame for glass sliding/tilting sunroof lid
Installation:
If necessary, apply light coat of Renax GL1 (Fuchs) grease
to guide duct.
Remove boot for glass sliding/tilting sunroof lid, left and
right,
refer to 54 12 015.
Slowly pull roof-lining frame completely forwards.
Release screws (1) and remove spring (2) on left/right.
Installation:
Tightening torque,
refer to Technical Data 54 12 5AZ
Installation:
Fit spring (1) on left/right as shown in illustration and screw
down.
RA Removing and installing/replacing roof-lining frame for glass sliding/tilting su
BMW AG - TIS
19.02.2013 22:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
