7 Series E38 750i (M73) SAL
Push the lock (1) in the direction of the arrow and remove.
Push the contact carrier (3) through the opening (5) using a
screwdriver.
Hold down the retainer (6) of the contact in the opening (7) of the
contact carrier using a small screwdriver. Pull the cable up to the
secondary locking unit.
Hold down the retainer again in the secondary locking unit and pull
the cable out of the contact carrier.
Note:
Work out and dispose of the old cable from the main wiring
harness up to the separating point.
RA Repairing front right wiring harness
BMW AG - TIS
19.02.2013 22:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -