bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing The Ignition Switch > < 2 RA Removing And Installing_replacing Fixture For Steering Column Stalk|Page 2426
Page 1
background image

61 31 016

Removing and installing/replacing turn
indicator/headlight dip lever

Version up to 09/98:

Extend steering column up to stop and move downwards.

Open steering column casing at bottom,

refer to 32 31 020.

Open steering column casing at top,

refer to 32 31 003.

Press clips together at top and bottom and remove switch.

Press together top and bottom clips and remove connector.

Version from 09/98:

This operation is described under:

Removing and installing/replacing steering column adjustment,

refer to 61 31 005.

RA  Removing and installing/replacing turn indicator/headlight dip lever

BMW AG - TIS

19.02.2013  23:02

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing The Ignition Switch > < 2 RA Removing And Installing_replacing Fixture For Steering Column Stalk|Page 2426