7 Series E38 750iL (M73) SAL
11 12 106
Removing and installing right cylinder head
(M73)
Remove upper section of timing case,
refer to 11 14 102
Remove splash guard.
Remove left and right heat baffle plates on front axle
support.
Unfasten drain plug for coolant on right engine block. Drain and
dispose of coolant.
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 11 5AZ
Top up coolant. Bleed cooling system and check for water leaks,
refer to 17 00 039
Remove spark plugs,
refer to 12 12 011
Remove coolant manifold,
refer to 11 53 325
Remove guide tube for dipstick
refer to 11 43 000
Remove exhaust pipes from right cylinder bank 1- 6,
refer to 18 31 015
Remove exhaust pipes from left cylinder bank 7 -12,
refer to 18 31 010
RA Removing and installing right cylinder head (M73)
BMW AG - TIS
20.02.2013 17:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -