7 Series E38 750iL (M73) SAL
Installation:
Remove gasket residue from left and right sealing faces and
clean up.
Coat contact surfaces of joint with liquid gasket
Hylomar SQ 32 M (refer to BMW Parts Service).
Installation:
Remove gasket residue from left and right sealing faces and
clean up. Coat contact surfaces of joint with liquid gasket
Hylomar SQ 32 M (refer to BMW Parts Service).
1.
Replace gasket.
2.
Install oil pan.
3.
Insert all oil pan screws.
4.
Insert screws in transmission end without preload at this
stage.
5.
Tighten down screws in engine end.
6.
Tighten down screws in transmission end.
RA Removing and installing/replacing upper section of oil pan (M73)
BMW AG - TIS
20.02.2013 17:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -