7 Series E38 750iL (M73) SAL
Installation:
Tighten cap screw firmly home in oil pump.
Installation:
Fit oil pump and tighten down with nuts (1 and 2).
Installation:
Fit sprocket with chain and tighten nut.
Tightening torque,
refer to Technical Data 11 41 4AZ
Installation:
Adjust timing chain deflection (A = 7 mm) by rotating hex
screw insert in oil pump.
Install screw and tighten down.
Note:
Use screwdriver insert (bit), Allen key (long version) or similar
tools with long hex head. In the procedure illustrated in this
diagram, the short leg of a standard Allen key is shortened to
approx. 32 mm.
RA Removing and installing or replacing oil pump (M73)
BMW AG - TIS
20.02.2013 17:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -