bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing _ Replacing Intake Air Manifold For Cylinders 1-6 (M73)|Page 615 > < 4 RA Removing And Installing _ Replacing Cover For Thermostat Housing (M73)

7 Series E38 750iL (M73) SAL

Page 1
background image

11 61 046

Removing and installing / replacing intake air
manifold for cylinders 1-6 (M73)

Switch off ignition.

Remove complete injection pipe with injector valves,

refer to 13 64 541

Disconnect plug connection (1). Unfasten screws, remove throttle
body and place to one side. Hoses remain connected.

Installation:

Replace gasket between manifold and throttle body.

Mark routing of lines for knock sensors  (1 and 2 ) on
manifold.

RA  Removing and installing / replacing intake air manifold for cylinders 1-6 (M73)

BMW AG - TIS

20.02.2013  17:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing _ Replacing Intake Air Manifold For Cylinders 1-6 (M73)|Page 615 > < 4 RA Removing And Installing _ Replacing Cover For Thermostat Housing (M73)