7 Series E38 750iL (M73) SAL
12 14 500
Removing and installing / replacing both
control units (Digital Motor Electronics) (M73)
Caution!
Note instructions for removal and installation of electronic
control unit!
refer to General Data MG 12
Switch off ignition.
Unscrew bolts.
Tightening torque,
refer to Technical Data 12 14 4AZ
Remove cover from control unit box.
Control unit (1) (DME 1), disconnect plug connection and remove
control unit from bracket.
Control unit (2)(DME 2): disconnect plug connection and remove
control unit from bracket.
Control unit (3) for Electronic Transmission Control (EGS)
Control unit (4) for Electronic Engine Power Control (EPC)
For subsequent procedure during exchange of control units, refer
to DIS.
RA Removing and installing / replacing both control units (Digital Motor Electronic
BMW AG - TIS
20.02.2013 19:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
