7 Series E38 750iL (M73) SAL
12 14 525
Replacing sensor for cylinder recognition
(camshaft sensor) (M73)
Switch off ignition.
Remove distributor cap with left ignition wiring harness,
refer to 12 11 096
Unscrew bolt (1). Remove sensor.
Installation:
Check seal (1) for damage, replace if damaged. To facilitate
assembly coat seal with anti-friction agent.
Interrogate fault memory of control unit on Digital Motor
Electronics (DME), check fault messages in memory, rectify faults
and cancel fault memory.
RA Replacing sensor for cylinder recognition (camshaft sensor) (M73)
BMW AG - TIS
20.02.2013 19:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -