7 Series E38 750iL (M73) SAL
12 31 230
Removing and installing / replacing mounting
block for alternator (M73)
Switch off ignition
Remove alternator,
refer to 12 31 020
Unfasten cover of oil filter to enable engine oil left in oil filter to
flow back into oil pan.
Installation:
Close cover on oil filter, check engine oil level and top up if
necessary.
Unfasten nut (1) on alternator mounting block, note down
installation position of oil lines and remove oil lines.
RA Removing and installing / replacing mounting block for alternator (M73)
BMW AG - TIS
20.02.2013 19:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -