bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Or Replacing Battery Positive Lead (between Starter, Alt|Page 755 > < 1 RA Removing And Installing Or Replacing Battery Positive Lead (between Starter, Alt|Page 753
Page 4
background image

Unfasten top screw on heat baffle plate for starter motor.

Unfasten bottom screw of heat baffle plate for starter motor,
remove heat baffle plate.

Unfasten connection for positive battery lead on starter motor.

Tightening torque,

refer to Technical Data 12 41 4AZ.

Impact protection for battery positive wire on floor of vehicle. 

Unfasten screws.

Remove impact protector.

RA  Removing and installing or replacing battery positive lead (between starter, alt

BMW AG - TIS

20.02.2013  19:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

1 RA Removing And Installing Or Replacing Battery Positive Lead (between Starter, Alt|Page 755 > < 1 RA Removing And Installing Or Replacing Battery Positive Lead (between Starter, Alt|Page 753