7 Series E38 750iL (M73) SAL
13 54 036
Removing and installing or sealing both
throttle bodies (M73)
Follow instructions for disconnecting and connecting the
battery,
refer to General Instructions MG 12
Switch off ignition.
Turn screws through 90
°
. Remove silencer cover from manifold.
Throttle bodies for cylinder 7-12:
Remove suction hose from throttle body.
Disconnect plug-in connection (1). Unscrew bolts. Remove
bracket with positive battery terminal.
Installation:
Replace gasket.
Release hose clamp (1), withdraw hose.
Remove hose (2).
If fitted, remove faulty air valve.
Installation:
Always replace fuel hose to tank vent valve and hose clips.
RA Removing and installing or sealing both throttle bodies (M73)
BMW AG - TIS
20.02.2013 19:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -