7 Series E38 750iL (M73) SAL
18 00 020
Removing and installing complete exhaust
system (M73)
Read out fault memory, clear if necessary.
Switch off ignition.
Cars up to 9/98 only
(without E catalytic converter):
Disconnect plug connections on oxygen sensors on left and right.
Unclip cable.
Installation:
Observe cable guide and clip into retainers again.
Cars from 9/98 only
(with E catalytic converter):
Unscrew bolt (1).
Unscrew nut (2).
Remove cover (3).
Unclip plugs (1) from retainer.
Disconnect plug connections of positive leads for E catalytic
converter.
Disconnect plug connection on oxygen sensor on right.
Remove cover on plug connection for oxygen sensor on left and
disconnect plug connection.
Release nut (2) on negative lead (3) on body.
RA Removing and installing complete exhaust system (M73)
BMW AG - TIS
20.02.2013 20:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
