7 Series E38 750iL (M73) SAL
Caution!
Do not damage rear section of engine support.
Expose connection point between pipe / underside of rear section
on engine support and open up welded seams.
Expose connection point between pipe / top side of front section
on engine support and open up welded seams.
Remove pipe.
Note:
To illustrate more clearly, shown with wheel arch removed.
Expose connection point between front section of engine support /
interior end wall and drill out welded spots.
Caution!
Avoid damage to wheel arch and end wall.
Remove engine carrier.
Remove remaining metal panels.
Straighten and grind joint surfaces.
RA Replacing front section of left engine support
BMW AG - TIS
20.02.2013 23:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
