7 Series E38 750iL (M73) SAL
Press rubber grommet (1) with wiring harness through sound
insulation/protective mat (2).
Unfasten screws (1) to (3).
Caution!
Carefully remove seal (1). Do not damage sound
insulation/protective mat (2). Material unravels.
Installation:
Lay 6 mm dia. butylene tape (sourcing reference: BMW Parts
Service) for sealing all around sound insulation/protective mat.
Using special tool 00 9 317 (trim panel wedge), lever out
bonding (1) of sound insulation/protective mat (2).
Carefully pull sound insulation/protective mat approx. 15 cm off
stud bolts (3).
Feed wiring harness (4) and cable (5) out of sound
insulation/protective mat.
RA Removing and installing/replacing sound insulation/protective mat on left or rig
BMW AG - TIS
21.02.2013 02:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -