7 Series E38 L7 (M73) SAL
11 12 719
Mill down cylinder head sealing face (M73)
(cylinder head dismantled)
Check evenness of cylinder-head ceiling surface with straight
edge (commercially available).
Deviation from planeness max. 0.05 mm.
Note:
Machine limit,
refer to Technical Data
Caution!
To compensate for compression, there is a repair cylinder
head gasket.
RA Mill down cylinder head sealing face (M73)
BMW AG - TIS
21.02.2013 22:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
