7 Series E38 L7 (M73) SAL
Keep sealing faces clean and free of oil.
Check dowel sleeves (1) for damage and correct installation
position.
Coat upper and lower edges of joint with Hylomar SQ 32 M
(refer to BMW Parts Service).
Keep sealing faces clean and free of oil.
Check dowel sleeves (1) for damage and correct installation
position.
Coat upper and lower edges of joint with Hylomar SQ 32 M
(refer to BMW Parts Service).
Replace all seals.
Caution!
Note installation direction of seals.
Insert all seals so that sealant bead (1) faces timing case
cover.
Note:
Secure seals with Hylomar SQ 32 M.
Fit timing-chain cover.
Insert screw in oil filler plug and fit flush.
RA Removing and installing/sealing or replacing timing case at top (M73)
BMW AG - TIS
21.02.2013 22:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -