Removing and Installing Lower Section of Timing Case (M73)
11 14 115
Removing and installing / sealing or replacing
lower section of timing case (M73)
Remove lower section of timing case cover,
refer to 11 14 110
Unfasten screws and remove water pump.
Installation:
Clean sealing faces and fit new gaskets.
Unfasten snap ring and remove tensioning rail (1).
Remove timing chain.
Installation:
Note installation location of chain on retaining bracket.
RA Removing and installing / sealing or replacing lower section of timing case (M73
BMW AG - TIS
21.02.2013 22:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -