7 Series E38 L7 (M73) SAL
Remove main bearing caps 1...7.
Lift out crankshaft.
Caution!
Note grinding stage of crankshaft,
refer to Technical Data
Check bearing clearance on crankshaft:
Install main bearing shells in engine block,
refer to 11 21 531
Fit special tool 00 2 590 (Plastigage Type PG 1) to the oil-
free crankshaft.
Note:
Do not turn crankshaft.
RA Replacing crankshaft (M73)
BMW AG - TIS
21.02.2013 22:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -