7 Series E38 L7 (M73) SAL
Unscrew nuts. Lift bearing cover off camshaft. Remove camshaft.
For tightening torque,
refer to Technical Data 11 31 1AZ
Note:
The bearing covers are assigned to the relevant bearing point
and must not be confused with one another. The code
numbers can be read on the exhaust side.
Installation:
Fit bearing cover with code number 7 to code number 7 on
cylinder head: then follow same pattern with bearing covers 6-
1.
Note:
Assembly of sprockets and adjustment of the camshaft is
described in above section on removing and installing timing
case,
refer to 11 14 102
RA Replacing right camshaft (cylinder bank 1-6) (M73)
BMW AG - TIS
21.02.2013 22:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -