7 Series E38 L7 (M73) SAL
If necessary, remove vent pipe (1).
Installation:
Installation position of vent pipe (1) in manifold (2).
Installation:
Clip rubber mount (1) of vent pipe (2) to rotary shaft in
manifold.
Installation:
Lug (1) on vent pipe must engage in bore (2) of manifold.
RA Removing and installing / replacing air intake manifold from cylinders 7-12 (M73
BMW AG - TIS
21.02.2013 22:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
