7 Series E38 L7 (M73) SAL
Unfasten hose clip and remove vacuum hose for brake booster.
Remove heating valve from bracket and place on manifold.
Unfasten top nuts in exhaust manifolds for cylinders 10 to 12,
remove heat baffle plate (1) and unfasten bottom nuts.
Installation:
Coat thread with -CRC- copper paste.
Replace nuts.
Tightening torque,
refer to Technical Data 11 62 1AZ
Installation:
Fit gaskets (1) with smooth side facing the cylinder head.
RA Removing and installing / replacing both left exhaust manifolds (M73)
BMW AG - TIS
21.02.2013 22:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -